JMail ASP Online Manual

 jmail.smtpmail
    Body : String
    Charset : String
    ContentTransferEncoding : String
    ContentType : String
    DeferredDelivery : Date
    Encoding : String
    ErrorCode : Integer
    ErrorMessage : String
    ErrorSource : String
    ISOEncodeHeaders : Boolean
    Lazysend : Boolean
    Log : String
    Logging : Boolean
    MailDomain : String
    MimeVersion : String
    Priority : Integer
    Recipients : String
    ReplyTo : String
    ReturnReceipt : Boolean
    Sender : String
    SenderName : String
    ServerAddress : String
    Silent : Boolean
    SimpleLayout : Boolean
    Subject : String
    UsePipelining : Boolean
    AddAttachment( FileName, [ContentType] )
    AddCustomAttachment( FileName, Data )
    AddHeader( XHeader, Value )
    AddNativeHeader( Header, Value )
    AddRecipient( Email )
    AddRecipientBCC( Email )
    AddRecipientCC( Email )
    AddRecipientEx( Email, Name )
    AddURLAttachment( bstrURL, bstrAttachAs, [bstrAuth] )
    AppendBodyFromFile( FileName )
    AppendText( Text )
    ClearAttachments()
    ClearCustomHeaders()
    ClearRecipients()
    Close()
    Execute() : Boolean
    ExtractEmailAddressesFromURL( bstrURL, [bstrAuth] )
    GetMessageBodyFromURL( bstrURL, [bstrAuth] )
    LogCustomMessage( Message )
Properties 
  Body : String
(v3.0) 
The body of the message. To append text to the body use AppendText

JMail.Body = "Hello world"
 
  
  Charset : String
(v3.0) 
This is the charset of the message. The default is "US-ASCII"

JMail.Charset = "US-ASCII"  
  
  ContentTransferEncoding : String
(v3.0) 
Specifies the content transfer encoding. The default is "Quoted-Printable"

JMail.ContentTransferEncoding = "base64"  
  
  ContentType : String
(v3.0) 
This is the contentype of the message. It defaults to "text/plain" but can be set to whatever you need. If you want to send HTML in your messages, change this to "text/html"

JMail.ContentType = "text/html"  
  
  DeferredDelivery : Date
(v3.0) 
Sets defered delivery of messages. If the mailserver supports it the message wont be delivered before this date and time.

JMail.DeferredDelivery = new Date( 2000, 02, 17 ).getVarDate();  
  
  Encoding : String
(v3.0) 
This can be used to change the default Attachment encoding from base64. Valid options are "base64", "uuencode" or "quoted-printable"

JMail.Encoding = "base64"  
  
  ErrorCode : Integer
(v3.0) 
Contains the error code if JMail.silent is set to true

Response.Write( JMail.ErrorCode )  
  
  ErrorMessage : String
(v3.0) 
Contains the error message if JMail.silent is set to true

Response.Write( JMail.ErrorMessage )  
  
  ErrorSource : String
(v3.0) 
Contains the error source if JMail.silent is set to true

Response.Write( JMail.ErrorSource )  
  
  ISOEncodeHeaders : Boolean
(v3.0) 
Encodes header stings according to iso-8859-1 character sets. The default is true.

JMail.ISOEncodeHeaders = false  
  
  Lazysend : Boolean
(v3.0) 
This property specifies if JMail is to wait until the mail is sent and then return or if it is to buffer the message and send it in the background. By setting this you do however don get controll of error messages etc.

NOTE: If you use this option, ServerAddress have NO function. The lazysend function will resolve the Mailserver with DNS queries. This can be a problem in some configurations.

JMail.LazySend = true;  
  
  Log : String
(v3.0) 
This is the log created by JMail when loging is set to true

Response.Write( JMail.Log )  
  
  Logging : Boolean
(v3.0) 
Enables/Disables logging in JMail

JMail.Logging = true  
  
  MailDomain : String
(v3.0) 
This can be used to override the EHLO/HELO statement to your mailserver

JMail.Maildomain = "hello.world.com"  
  
  MimeVersion : String
(v3.0) 
Specifies the mime version. The default is "1.0"

JMail.MimeVersion = "1.0"  
  
  Priority : Integer
(v3.0) 
This is the priority of the message. The range of priorities can be from 1 to 5. 
1. This means that the message is High Priority. Some mailers prefer to call this level "Urgent". 
2. This is also high priority. 
3. This is normal priority. 
4. This is low priority. 
5. This is the lowest priority. 


JMail.Priority = 3  
  
  Recipients : String
(v3.0) 
Readonly property of all recipients of this message

Response.Write( "" + JMail.Recipients + "" )  
  
  ReplyTo : String
(v3.0) 
Specifies a optional reply address

JMail.ReplyTo = "president@dimac.net"  
  
  ReturnReceipt : Boolean
(v3.0) 
Specifies wether or not the sender requires a return receipt. The default value of the property is "false"

JMail.ReturnReceipt = true  
  
  Sender : String
(v3.0) 
Specifies the sender address of the message

JMail.Sender = "batman@dimac.net"  
  
  SenderName : String
(v3.0) 
Specifies the sender name of the message

JMail.SenderName = "Bat man"  
  
  ServerAddress : String
(v3.0) 
Specifies the address of the server. There can be more than one server specified by separating the list with a semicolon. If a port other than 25 is used then specify this by adding a colon after the servername. If the serverAddress is left blank JMail will try to resolv the remote Mail server and sen the message directly to that server.

JMail.ServerAddress = "mail.mydom.net; mail2.mydom.net:2500"  
  
  Silent : Boolean
(v3.0) 
Set to true, JMail will not trow exceptions. Instead JMail.execute() will return true or false depending on the success of the operation

JMail.silent = true  
  
  SimpleLayout : Boolean
(v3.0) 
Set to true to reduce the number of headers JMail produces.

JMail.SimpleLayout = true  
  
  Subject : String
(v3.0) 
Specifies the subject of the message

JMail.Subject = "Dimac rocks big time!"  
  
  UsePipelining : Boolean
(v3.0) 
Overrides if JMail should use pipelining on a server that supports it.

JMail.Pipelining = false  
  
  
Methods 
  AddAttachment( FileName, [ContentType] )
(v3.0) 
Adds a file attachment to the mssage

JMail.AddAttachment( "c:\\autoexec.bat" );  
  
  AddCustomAttachment( FileName, Data )
(v3.0) 
Adds a custom attachment. This can be used to attach "virtual files" like a generated text string or certificate etc.

JMail.AddCustomAttachment( "readme.txt", "Contents of file" );  
  
  AddHeader( XHeader, Value )
(v3.0) 
Adds a user defined X-header to the message

JMail.AddHeader( "Originating-IP","193.15.14.623" );  
  
  AddNativeHeader( Header, Value )
(v3.0) 
Adds a header to the message

JMail.AddNativeHeader( "MTA-Settings", "route" );  
  
  AddRecipient( Email )
(v3.0) 
Adds a recipient to the message

JMail.AddRecipient( "info@dimac.net" );  
  
  AddRecipientBCC( Email )
(v3.0) 
Adds a Blind Carbon Copy recipient to the message

JMail.AddRecipientBCC( "someone@somedomain.net" );  
  
  AddRecipientCC( Email )
(v3.0) 
Adds a Carbon Copy recipient to the message

JMail.AddRecipientCC( "someone@somedomain.net" );  
  
  AddRecipientEx( Email, Name )
(v3.0) 
Adds a recipient with a name to the message

JMail.AddRecipientEx( "info@dimac.net", "Dimac INFO" );  
  
  AddURLAttachment( bstrURL, bstrAttachAs, [bstrAuth] )
(v3.0) 
Downloads and adds an attachment based on an URL. A seconds argument, "AttachAs", is used for specifying the filename that the attachment will receive in the message. A third and optional argument is used for optional WWW-Authentication.

JMail.AddURLAttachment( "http://download.dimac.net/jmail/jmail.exe", "jmail.exe" )  
  
  AppendBodyFromFile( FileName )
(v3.0) 
Appends body text from a file

JMail.AppendBodyFromFile( "c:\\mytext.txt" );  
  
  AppendText( Text )
(v3.0) 
Append "text" to body

JMail.AppendText( "Text appended to message Body" );  
  
  ClearAttachments()
(v3.0) 
Clears the list of attachments

JMail.ClearAttachments();  
  
  ClearCustomHeaders()
(v3.0) 
Clears all custom headers

JMail.ClearCustomHeaders();  
  
  ClearRecipients()
(v3.0) 
Clear the recipient list

JMail.ClearRecipients();  
  
  Close()
(v3.0) 
Force JMail to close an cached connection to a mailserver.

JMail.Close();  
  
  Execute()  : Boolean
(v3.0) 
Executes and sends the message to the server

JMail.Execute();  
  
  ExtractEmailAddressesFromURL( bstrURL, [bstrAuth] )
(v3.0) 
Downloads and adds email addresses from an URL.

JMail.ExtractEmailAddressesFromURL( "http://duplo.org/generateEmailList.asp" );  
  
  GetMessageBodyFromURL( bstrURL, [bstrAuth] )
(v3.0) 
Clears the body of the message and replaces it with the contents of the URL. The contenttype is automaticly set to match the contentype of the URL. The second argument (login and password) is optional

JMail.GetMessageBodyFromURL( "http://duplo.org/", "login:password" )  
  
  LogCustomMessage( Message )
(v3.0) 
Logs a custom user message to the JMail log. This function works ONLY if loging is set to true

JMail.LogCustomMessage( "Hello world" );